Enable navigation of FORD SYNC
Activating navigation available for all models of Ford and Lincoln for any version of Sync from 2011 to the present. Ford Sync My Ford Touch is installed on cars Ford C-Max 2013-, Ford Escape 2013-, Ford Edge 2011-, 2011- Ford Explorer, Ford Flex 2013-, Ford Mustang 2015, the company Ford Fiesta 2014-, Ford Focus 2011- Ford Fusion 2013-, Ford Taurus 2013-, Ford F-150 2013-, Ford Super Duty 2013-, Ford Expedition 2015 ,, Ford Transit Connect 2014-, Ford Transit 2015, the company Ford Everest 2015, the company Ford Ranger 2015 year ,, Ford Mondeo 2015, the company Ford Tourneo Connect 2016-, 2017- Lincoln Continental, Lincoln MKX 2011-, Lincoln MKT 2013-, Lincoln MKS 2013-, Lincoln MKZ 2013 Lincoln MKC 2015 ,, Lincoln Navigator to 2015
Remote activation of the self-navigation Ford Sync MyFord Touch
1. Send us an e firstname.lastname@example.org your vehicle's VIN number, the serial number of APIM (ESN) or a photo If you, yourself updated or replaced APIM Sync module, please send us the latest information about your software using the diagnostic tool: Sync Status Checker download, unpack, copy the root of the USB flash drive files: autoinstall.lst, install.lst and folder SyncMyRide. Insert the USB flash drive into the USB HUB of the car, waiting for reports on the successful installation of the files, remove the USB stick from the car, connect the USB flash drive to a PC, in SyncMyRide folder on the flash drive will have to file with your serial number ESN and VIN number of your car in the .XML format attach it to the message and send it to us.
2. Next, you need to change the configuration of the central module APIM (As-Built), is to use the J2534 diagnostic cable with support for MS-CAN (ELS27, ELM327, OpenPort 2.0, OBDLink, VCM) to work with the software FORScan + extended license FORScan program to edit the configuration AS-BUILT.
3. Run FORScan, connect to the car, go to the section "Configuration and programming", choose "APIM module configuration (in AS BUILT format)" The right to prompt 7D0-01-02 00 (without navigation) to 04 (with navigation)
- To activate the navigation in the instrument panel with the Ford Focus 2011- need to improve As-Built in BCMii module using FoCCCus program change line # 172 "with NAVi display"
- To activate the navigation in the instrument panel with the Ford Explorer 2011- need to improve As-Built module IPC 720-01-01 E5C0 6FFE 245F on E5C2 6FFE 2461
- To activate the navigation in the instrument panel Ford Mondeo / Fusion with 2014- need to improve As-Built module IPC 720-05-01 D8A8 0100 00AE on D8B8 0100 00BD
4. After receiving the information from you, we will send you e-mail a link to the file with the license for the SYNC navigation, you need to unzip the archive to clean previously formatted USB flash drive in FAT or FAT32 format. Connect the USB drive to the media hub of the car, after the message on the display about the successful installation, remove the USB flash drive and make the full discharge of SYNC.
PayPal 100$ email@example.com